Morningstar Ground Fault Protection Device for 150 volt

Morningstar’s Ground Fault Protection Device™ (GFPD) prevents current from following any unintended paths during a ground fault. Other ground fault detection/interruption products break the bond to the grounded conductor. When this occurs, not only is the earth bond compromised, but the battery and DC loads can also be left ungrounded and floating. For a negatively grounded system this means that the negative side of the battery and loads can float to negative Voc in relation to ground and the positive side can float to (negative Voc + Vbat). Morningstar’s GFPD better isolates the array from the battery and loads, while maintaining the bond to ground. Compatible with:

• TriStar MPPT 600V
• TriStar MPPT
• ProStar MPPT

Specifications and Certifications by Model

Key Features and Benefits

• Disconnects both the positive and negative conductor and completely isolates PV source circuits
• Trips at 300mA compared to 1A for alternative solutions
• Provides design flexibility to accommodate large and small array configurations
• Uses high quality breaker solutions rather than fuses which are problematic to replace at remote sites
• Works like a traditional AC GFI
• Maintains the integrity of earth bond for battery and loads
• Does not require an extra warning label at the battery per U.S. National Electric Code requirements
• Makes it easier to locate and troubleshoot ground faults
• Powered via the pv system’s battery
• Equipped with both visual and audible alarms
• Built to support both single controller and multiple controller systems
• When the earth bond is not broken, Morningstar’s GFPD will only shut off affected controllers
• All loads will continue to operate safely with the battery remaining bonded to ground
• Multiple controllers and GFPDs can be added on an as-needed basis

The E2000LFP Expandable Power Station combines power and flexibility in a portable package. Link it with two EB3000 battery packs to reach an impressive 8064Wh capacity - enough for almost any power need.

With 2000W AC output, it runs most household devices and tools without breaking a sweat. The advanced LiFePo4 batteries deliver outstanding durability, keeping 80% capacity even after 3500 charging cycles.

Charging is quick and flexible. The station accepts up to 1300W input across multiple ports, with 600W maximum solar input. Using solar panels, you'll fully charge in 2-3 hours. Need it faster? Dual AC adapters cut that time to just 1.5-2 hours.

The E2000LFP Expandable Power Station combines power and flexibility in a portable package. Link it with two EB3000 battery packs to reach an impressive 8064Wh capacity - enough for almost any power need.

With 2000W AC output, it runs most household devices and tools without breaking a sweat. The advanced LiFePo4 batteries deliver outstanding durability, keeping 80% capacity even after 3500 charging cycles.

Charging is quick and flexible. The station accepts up to 1300W input across multiple ports, with 600W maximum solar input. Using solar panels, you'll fully charge in 2-3 hours. Need it faster? Dual AC adapters cut that time to just 1.5-2 hours.

The E2000LFP Expandable Power Station combines power and flexibility in a portable package. Link it with two EB3000 battery packs to reach an impressive 8064Wh capacity - enough for almost any power need.

With 2000W AC output, it runs most household devices and tools without breaking a sweat. The advanced LiFePo4 batteries deliver outstanding durability, keeping 80% capacity even after 3500 charging cycles.

Charging is quick and flexible. The station accepts up to 1300W input across multiple ports, with 600W maximum solar input. Using solar panels, you'll fully charge in 2-3 hours. Need it faster? Dual AC adapters cut that time to just 1.5-2 hours.