Cummins C175D6C Ag Spec-175kW-Diesel-No Enclosure-120/240V-1Ph Generator

#C175D6C A061T476

Cummins® generator sets made for the agriculture market are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary Standby applications. These units do not come with an enclosure or a fuel tank.

Key features

Robust product design and testing: The generator is designed to operate under extreme environmental conditions. The generator is tested and certified per the latest EPA and UL standards.

Heavy duty engine: Rugged 4-cycle industrial diesel delivers reliable power and fast response to load changes.

Alternator: Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Control system: Provides total generator set system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Cooling system: Standard cooling package provides reliable running at up to 50 °C(122 °F) ambient temperature. Coolant heaters also come standard on generator sets for starting well below freezing.

Battle Short Mode: This mode will allow the generator to override certain faults that would normally shut the generator down.

Flexible exercise mode: The innovative, flexible exercise mode enables the generator to exercise at a time, frequency and duration that suits the customer’s preference reducing unnecessary fuel consumption, emissions and noise.

Self-diagnostics and easy service: The generator is equipped with Cummins PowerCommand® electronic control to provide industry-leading self-diagnostic capabilities. In addition, critical components of the generator are designed to ensure service and preventive maintenance can be completed in a short period of time.

Specification

Document Library

Spec Sheet

IBC Seismic Certificate of Compliance

Exhaust Emission Data Sheet

Outline Drawing

Wiring Diagram, Genset

Shipping Policy

Our goal is to get your parts and products to you as efficiently and safely as possible. The guidelines below outline what you can expect about fulfillment, shipping, and eligible products.

Shipping and Order Fulfillment Guidelines


Order Fulfillment: Orders usually ship within 1-5 business days. Shipments generally arrive in 1-3 business days after leaving our facilities. Please note that no orders will be fulfilled on Saturday or Sunday; instead, they will be fulfilled the next business day.



Pick Up: You may choose to pick-up your order at no cost from any of our listed locations in the USA and Canada. As soon as the order is ready for pick-up, we will send you an email. Your order should be ready for pickup within 2 – 3 business days, depending on the availability of parts.



Shipping Address: Your shipping address may be either a residential or commercial address in the United States and Canada. We do not ship to P.O. Box addresses, and we do not ship to any addresses outside the USA and Canada.



Method of Shipping: Standard ground shipping is the default shipping method for the USA and Canada.* Once your product is shipped, it should take 1–3 business days for delivery. Standard shipping to Alaska and Hawaii typically takes 14–21 business days.

* Exceptions may apply in shipping to some states in the USA. Currently, Build the Power does not offer shipping to US territories, Nunavut, Northwest Territories or Yukon.

Shipping Fees

Free Shipping: We offer free shipping on all orders.

Eligible Products

All products are eligible for Standard Free Shipping except for the product categories listed below. These products are eligible for Store Pick-Up Only:

Dangerous or hazardous goods, such as batteries.
Products that require special handling, such as a pail of oil or coolant.

Returns and Refunds Policy

We are committed to providing a straightforward, hassle-free return process. Please read our policy to be sure your order qualifies.

If your product was damaged in shipping, or if you received an incorrect part please contact us so that we can assist you. Do not initiate a return for such orders.

Return Guidelines

Return Initiation

Your return must be initiated on Build the Power website. Please do not take your parts to a store without initiating the return online first as your returns will not be accepted.


Return Timeline

Eligible part returns can be initiated for up to 30 days from the shipment or pickup availability date. Returns must be received by the return location within 14 days of return initiation.


Return Method

You may return products either in-store to your original pickup location, or through mail. Drop off returns are only available if you picked up your products at a branch.



In-Store Return: Available only for pickup orders. You will need to initiate the return online first. Look up your order using your Order Number and email address and identify the product(s) you would like to return. You will then have the option to return the product(s) to your original pickup location. You will be issued a Return Confirmation email as soon as you submit your return request. Please bring a copy of the packing slip from your return order along with the products. Note: If you purchased as a signed in user, make sure to sign into your account first.


Mail-In Return: You will need to initiate the return online first. Look up your order using your Order Number and email address and identify the product(s) you would like to return. You will be issued a Return Confirmation email as soon as you submit your return request. Include the packing slip with your parts that are being returned. 


Product Condition

Products purchased on buildthepower.com must be returned in saleable condition — in other words, unused, in the original packaging, and undamaged. Please note, all accepted returns will incur a 15% handling fee.


Products that are Not Eligible for Return

-Superseded and obsolete products or parts.
-Parts that were not purchased through the Build the Power.
-Parts not purchased from Build the Power and non-stocking parts.
-Piston pins except as part of piston or cylinder kits.
-Electronics (including but not limited to sensors)
-Hazardous materials such as paints, sealants, flush kits, lubricants, spray cleaners and other materials.
-Consumable products.
-Software.
-Make-to-Order and Customized items (calibrated fuel pumps, custom specified radiators / alternators / mufflers /adapters / etc.)
-Belts, service tools, and rebuilt or non-genuine parts.
-Printed circuit boards and other electronic components that were shipped in anti-static packaging which have been opened.


Refund Policy

Handling Fees

All accepted parts returns will incur a 15% handling fee.


Return Label

You will be responsible for shipping the return package to the appropriate location. For US returns, we recommend you ship via FedEx to avoid potential delays. If you are returning a product because an incorrect part was shipped, or the product was damaged in shipping please contact us so that we can assist you.


Refund Timeline

Once we have approved the return, a refund will be issued within 7-10 business days.

Warranty

2 years factory warranty.